Sweep Start Position - FeelElec FY6800 Series User Manual

Sweep Start Position

When Sweep function is enabled. Sweep start position need to be set
according to sweep objects.
 Frequency Sweep: Press STAR button to highlight start frequency
parameter. Press the Arrow buttons and rotate the ADJ Knob to set the
specified value. For example:
START：00'010.000'000'000kHz
 Amplitude Sweep: Press STAR button to highlight start amplitude parameter.
Press the Arrow buttons and rotate the ADJ Knob to set the specified value.
For example:
START：10.00V
 Offset Sweep: Press STAR button to highlight start offset parameter. Press
the Arrow buttons and rotate the ADJ Knob to set the specified value. For
example:
START：00.00V
 Duty Cycle Sweep: Press STAR button to highlight start duty cycle
parameter. Press the Arrow buttons and rotate the ADJ Knob to set the
specified value. For example:
START：50.0%
32
FY6800 Series User's Manual