Sweep Type - FeelElec FY6800 Series User Manual

Sweep Type

FY6800provides Linear, Logarithm sweep types. The default is Linear sweep.
The sweep type can be switched by pressing "MODE" button.
Linear Sweep
In linear sweep type, the signal parameter varies linearly. For example, in the
frequency sweep the output frequency of the instrument varies linearly in the way
of "Changing several Hertz per second". The variation is controlled by "Start
Frequency", "End Frequency" and "Sweep Time".
The step value of linear sweep object is computed by the generator, the
formula is as follows:
Step value=（End value — Start value）/（Sweep time*100）
Logarithm Sweep
In linear sweep type, the signal parameter varies logarithmically.
For example, in the frequency sweep the
"octave per second" or "decade per second".
Frequency", "End Frequency" and "Sweep Time".
When Logarithm Sweep is enabled, users can set the following parameters:
Start Frequency (F
The function prototype of Logarithm Sweep:
F is the instantaneous frequency of the current output. P and T could be
current
expressed as shown below by the above-mentioned parameters:
Wherein, t is the time from the start of the sweep and its range is from 0 to
T
sweep.
FY6800 Series User's Manual
, Stop Frequency (F
)
start
F
current
lg(F
P=10
T=t+lg(F
output frequency changes in the way of
The variation is controlled by "Start
and Sweep Time (T
)
end
T
=P
/F )/T
stop end sweep
)/lg(P)
start
).
sweep
35