System Configuration And Auxiliary Functions - FeelElec FY6800 Series User Manual

System Configuration and Auxiliary Functions

Press the SYSTEM button on the front panel to open the operation interface
shown in the figure below. This interface displays function information such as
instrument parameter storage, parameter loading, synchronization, and
configuration.
SAVE: To save current parameters of waveform to save positions (20 sets).
LOAD: To load parameters to current working status from save positions.
CONF: To set system language, turn on/off Buzzer and Uplink mode.
MORE: To set default output status of dual channels.
CH1 BOOT：ON
The default CH1 channel is on to turn on the output state， can press the [ F1 ]
button to set the default output status of the CH1 channel.
CH2 BOOT: ON
The default CH2 channel is on to turn on the output state， can press the [ F2 ]
button to set the default output status of the CH2 channel.
FY6800 Series User's Manual
37