Select Waveform - FeelElec FY6800 Series User Manual

Select Waveform

FY6800 can output Function/Arbitrary Waveform including:
 Sine
 Square
 Triangle/Ramp
 Rise Sawtooth
 Fall Sawtooth
 Lorenz Pulse
 Multitone
 Noise
 Electrocardiogram (ECG)
 Trapezoidal Pulse
 Sinc Pulse
 Narrow Pulse
 Gauss White Noise
 Step Triangle
 Positive Step
 Inverse Step
 Positive Exponent
Press WAVE to change waveform selected. Or rotate ADJ Knob under waveform
switching status to change waveform. The waveform diagram displays on the
screen. Pressing the knob can change to arbitrary waveform directly when
choosing waveform. At start-up Sine is selected by default. (Users can also
configure start-up waveform. Please check Chapter "Save and Load".
Waveforms
Function Name
Frequency
Amplitude
Parameters Offset
Phase
Duty Cycle
Note: Arbitrary waveforms can be edited and downloaded from PC software
provided by FeelElec. The relevant software and driver can be downloaded from
our website: www.feelelec.com
FY6800 Series User's Manual
 Inverse Exponent
 Positive Falling Exponent
 Inverse Falling Exponent
 Positive Logarithm
 Inverse Logarithm
 Positive Falling Logarithm
 Inverse Falling Logarithm
 Linear FM
 AM
 FM
 Positive Half Wave
 Negative Half Wave
 Positive Half Wave
Rectification
 Negative Half Wave
Rectification
 User-defined waveform
Sine Square
SINE SQUR
√ √
√ √
√ √
√ √
√
.
Triangle Sawtooth
TRGL Ramp
√ √
√ √
√ √
√ √
Arbitrary
Arb
√
√
√
√
17