Synchronization - FeelElec FY6800 Series User Manual

Synchronization

After pressing the SYSTEM button, press the [SYNC] soft key to enter the
synchronization function setting interface. Press the right parameter soft key to
switch it in the selected (highlighted)/canceled state.
When the synchronization of corresponding parameters are activated, the
corresponding parameters of CH2 will vary according to variation of CH1
automatically. The parameters workable for synchronization include waveform,
frequency, amplitude, offset, and duty cycle, which can be set separately.
 The WAVE soft key is highlighted. The waveform type of CH2 and the
waveform type of CH1 change synchronously.
 The FREQ soft key is highlighted. The waveform frequency of CH2 and the
waveform frequency of CH1 change synchronously.
 The AMPL soft key highlights, the waveform amplitude of CH2 and the
waveform amplitude of CH1 change synchronously.
 The OFFS soft key is highlighted. The waveform offset of CH2 and the
waveform offset of CH1 change synchronously.
 The DUTY soft key is highlighted. The duty cycle of CH2 and the duty cycle of
CH1 change synchronously.
FY6800 Series User's Manual
41