Statistics - CYBEX 750T Service Manual

Displays the count-down to the next required service in miles remaining. Also allows for resetting this
odometer of a service has been performed.
Displayed as "SERVICE IN XXXXX MI (or KM)" where XXXXX is the distance until the next scheduled
maintenance. The odometer is set to 15,000 miles (24,140 Km). The Odometer counts down from
15,000 (24,140 Km) miles to 0 before displaying the Service message. Press and hold the CLEAR key
for three seconds while displaying the service odometer will reset it to 15,000 miles (24,140 Km).

Statistics

The Statistics screen allows tracking of equipment usage.
Open Statistics screen from Dormant Mode
Press Clear
Key 9-9-9
Press ENTER
Data features can also be accessed from the CSAFE port.
Use the ENTER key to advance to next screen.
Use the Load Control Keys to scroll forward or backward in the menu.
Statistics Menu
ST1 – ODOMETER
ST2 – HOURS
ST3 – STARTS
ST4 – MOVES
ST5 – ERRORS
ST6 – SERVICE
ST7 – PGM USAGE
WARNING: All maintenance activities shall be performed by qualified personnel. Failure
to do so could result in serious injury.
NOTE: Cybex is not responsible for performing regular inspection and maintenance actions for your
treadmill. Instruct all personnel in equipment inspection and maintenance actions and also in
accident reporting/recording. Contact Cybex Customer Service at 888-462-9239 or
508-533-4300 for any preventive maintenance or service concerns.
Cybex 750T Treadmill Service Manual
Display
MI XXXX.X or 0.0 – 999,999.9 Miles/Km = total miles accumulated and
KM XXXX.X units are either Miles or Km, depending on the setup.
HOURS 0 – 99999 = total time in hours for running belt
movement.
STARTS XXXXXX 0 – 999999 = number of running belt starts
MOVES XXXXXXX 0 – 9,999,999 = Number of incline moves in 1%
increments.
[Log #] [ERR #] Tracks error codes in a rolling log of 20 entries, each
HH:MM M-DD-YY stamped with time and date
SVC IN XXXXX MI The distance until the next scheduled maintenance. This
(or KM)" counts down from 15,000 miles
PR Y XXXXXX Y= program number
XXXXX = number of times each program has been
started
Preventive
Maintenance
Page 2-7