Unloading A Used Film Pack; Turning On/Off The Printer; Checking The Printer Status With The Led Light On; Printer - FujiFilm instax mini Link User Manual

3
Close the film door�
4
Remove the black film cover that is automatically
rejected�

Unloading a Used Film Pack

1
Slide the film door lock and open the film door�
1
2
Grasp the rectangular holes on the film pack, then
pull film pack out from the printer�
2
1
6
2

Turning on/off the Printer

Press and hold the Power button for approximately 1 second to
turn the printer on or off.
Turning the printer on lights up the LED.
If no operation occurs for roughly 10 minutes, the printer turns off
automatically.
Checking the Printer Status with the LED
Light on Printer
You can check the printer status with the LED.
Color LED status
Blue Lighting
Orange Lighting
Pink Lighting
White Flashing wave-
like form
White Flashing
Purple Lighting
Rainbow color Flashing
–* Flashing*
Yellow Lighting
Yellow Flashing quickly
Yellow Flashing slowly
Red Flashing
Green Flashing
Green Lighting
*During printing, the color of the flashing LED changes depending
on the main colors of the image being transferred.
Status
Connecting to the App/
Print mode
Connecting to the App/Fun
mode
Connecting to the
App/INSTAX Camera mode
Connecting to the App/
Operation screen
Firmware is being updated
Reprinting
Transferring an image
Printing
Critical error occurred
Non-critical error occurred
Minor error occurred
Charging
Almost charged
Charged (When the printer
is turned on and not
connected to the App)