Loading/Unloading The Instax Mini Film Pack; Loading The Film Pack - FujiFilm instax mini Link User Manual

Notes
• The battery cannot be removed.
• The battery is not fully charged when shipped. Be sure to
charge the battery before use.
• For notes about the battery, see "Common Sense Printer Care".
(p.13)

Loading/Unloading the INSTAX Mini Film Pack

Caution
Do not open the film door until you have used up the film;
otherwise, the rest of the film will become exposed and turn
white� The film can no longer be used�
• When you load the film pack, never press the two rectangular
holes on the back of the film pack.
• Never use a film pack beyond its shelf life; otherwise, it may
damage the printer.
Use FUJIFILM INSTAX Mini Instant Print Film only. The
INSTAX SQUARE Film or INSTAX WIDE Film cannot be used.
Notes on the film pack
• Each FUJIFILM INSTAX Mini Film pack contains one black film
protective cover and 10 film sheets.
• Do not remove the film pack from its inner bag before
loading it into the printer.
• The film cover is ejected automatically when the film door is
closed.
For details, refer to the instructions and warnings on the
package of FUJIFILM INSTAX Mini Instant Print Film.

Loading the Film Pack

1
Slide and hold the film door lock and open the film
door.
1
2
Insert film pack by aligning the yellow marks�
2
1
Note
Be sure to align the yellow marks on the printer and on the
film pack.
NA_EN
2
5