Rayco RG165T-R Operator, Service, Maintenance Manual page 35

Track Expansion / Retract
TRACKS SHOULD BE EXPANDED TO 51" WIDTH
AT ALL TIMES UNLESS REQUIRED TO REDUCE
WIDTH TO GAIN ENTRY INTO A NARROW
SPACE. OPERATING MACHINE WITH TRACKS
LESS THAN 51" WIDE INCREASES THE RISK OF
MACHINE ROLLOVER. MACHINE SHOULD NOT BE
OPERATED WITH TRACKS LESS THAN 51" ON ANY
UNEVEN TERRAIN.
• Place machine on level ground
• Lift machine with blade and boom to elevate tracks
• Expand tracks to full 51" or retract tracks to less than 36"
• Lower machine to ground
Blade Transition
The RG165T-R comes equipped with a 50 1/2" wide blade.
For convenience of transporting through gates, or to load
and unload on and off a trailer, the blade has wings (1) that
can swing in to be only 34 1/2" wide.
To swing the blade wings inward, pull the clevis pins (2)
located on the back side of the blade. Simply turn the wings
inward, reinstall the clevis pins at holes (3) located on top of
blade to ensure they stay folded in.
2
800.392.2686
3
1
RG165T-R Operator · Service · Maintenance
Operation
35