Rayco RG165T-R Operator, Service, Maintenance Manual page 29

Remote Battery Replacement
Should your remote batteries fail, they are replaceable.
The remote requires three AA batteries that are accessible
from the bottom of the remote. When replacing the remote
batteries Rayco recommends that you use good quality
alkaline batteries only.
To remove the batteries, locate the thumb screw (A), and
loosen to remove cover. Push the battery pack toward the
red cover (B) and pull outward. Once the battery pack is
removed, slide the end with the terminals from the housing.
Replace batteries following the + and - ends and reinstall
battery pack.
A
800.392.2686
Remote (Backup)
Should your remote control fail, or batteries die in the field, the
RG165T-R comes equipped with a remote tether option. To
utilize the cord, unscrew the caps (C) covering the ports on
the remote and the rear of the machine, and install the cord.
Once the cord is installed you can then operate the machine
as normal, but without the free range feature of the remote.
Note: Be sure to line the connectors up properly to avoid
damaging pins in the connectors.
B
RG165T-R Operator · Service · Maintenance
Operation
C
C
29