Overview Of Menu Items - Omron NS Series Setup Manual

6-1 Operating Modes and System Menu
6-1-3

Overview of Menu Items

The following tables show the eight menu items and provide an overview of their contents.
1. Initialize Tab
Screen Data Area
Alarm/Event History
Data Log
Operation Log
Error Log
System language
Memory Card
Internal Holding Memory
($HB/$HW)
2. PT Settings Tab
Start-up Waiting Time
Screen Saver
Screen Saver Start-up
Time
Key Press Sound
Buzzer Sound
Backlight
Calendar Check
Printer Type
Orientation
Mode
Changing Value in Device
Monitor Setting
Contrast (NS5-SQ/MQ
only)
6-4
Item
Formats project data, such as screen data.
Initializes or saves in the Memory Card as a CSV file the
alarm/event history data that has been generated during opera-
tion.
Initializes or saves in the Memory Card as a CSV file the data log
data that registers changes to the contents of an address, or
saves in the Memory Card as a CSV file.
Initializes or saves in the Memory Card as a CSV file the operation
log data, such as that for functional object operations and screen
switching.
Initializes or saves in the Memory Card as a CSV file the error log
data that is generated by macro errors.
The language to display system menus, input keypads, error mes-
sages, etc., can be set to Japanese or English.
The Memory Card in the PT can be removed.
Initializes the Internal Holding Bit/Word Memories.
Item
Sets the system startup waiting time. Communications are not
performed during this specified time when the power is turned ON
or the PT is reset. The default is 0 s.
Sets the screen saver to ON or OFF. The default setting is OFF.
Sets the amount of time after which the screen saver is started.
The default setting is 15 min.
Sets whether a sound will be heard when a touch switch is
pressed. The default setting is ON.
Sets whether a buzzer will be heard when a command from the
host is received or an error occurs. The default setting is ERR ON.
Sets the backlight brightness to one of three levels. The bright-
ness cannot be adjusted much.
The default setting is High.
Displays and sets the date and time for the internal clock.
Sets the control method for the printer connected to the PT.
Sets the paper orientation for the printer connected to the PT.
Sets the printing method for the printer connected to the PT.
Selects whether to set or just monitor device monitor values in the
functions for Registered Monitor and 6-3-9 Switch Box.
Adjusts the contrast for the screen.
Function
Function
Page
P. 6-10
P. 6-11
P. 6-12
P. 6-13
P. 6-15
P. 6-16
P. 6-17
P. 6-18
Page
P. 6-21
P. 6-21
P. 6-21
P. 6-22
P. 6-22
P. 6-23
P. 6-23
P. 6-24
P. 6-25
P. 6-25
P. 6-25
P. 6-26