Overview Of Menu Items - Omron NS7 Series Setup Manual

6-1 Operating Modes and System Menu
6-1-3

Overview of Menu Items

The following tables show the eight menu items and provide an overview of their contents.
1. Initialize Data Tab
Item
Screen Data Area
Alarm/Event History
Data Log
Operation Log
Error Log
System language
2. PT Operation Settings Tab
Item
Start-up Waiting Time
Screen Saver
Screen Saver Start-up
Time
Key Press Sound
Buzzer Sound
Backlight
Calendar Check
Contrast (NS7 only)
3. Project Tab
Item
Project Title
Number of Labels
Initial Screen
Initial Label
Alarm/Event Recording
Method
Data Log Recording
Method
Operation Log Recording
Method
Error Log Recording
Method
System Memory ($SB)
System Memory ($SW)
6-4
Formats project data, such as screen data.
Initializes alarm/event history data that has been generated during
operation.
Initializes the data log data that registers changes to the contents
of an address.
Initializes operation log data, such as that for functional object
operations and screen switching.
Initializes error log data that is generated by macro errors.
The language to display system menus, input keypads, error mes-
sages, etc., can be set to Japanese or English.
Sets the system startup waiting time. Communications are not
performed during this specified time when the power is turned ON
or the PT is reset. The default is 0 s.
Sets the screen saver to ON or OFF. The default setting is OFF.
Sets the amount of time after which the screen saver is started.
The default setting is 15 min.
Sets whether a sound will be heard when a touch switch is
pressed. The default setting is ON.
Sets whether a buzzer will be heard when a command from the
host is received or an error occurs. The default setting is ERR ON.
Sets the backlight brightness to one of three levels. The bright-
ness cannot be adjusted much.
The default setting is High
Displays and sets the date and time for the internal clock.
Adjusts the screen contrast.
Displays the project title.
Displays the number of corresponding labels.
Sets and displays the screen numbers first displayed after the
power is turned ON.
Sets and displays the label number shown on the screen after the
power is turned ON.
Displays the method for recording the alarm/event histories.
Displays the method for recording the data log.
Displays the method for recording the operation log.
Displays the method for recording the error log.
Displays the allocated addresses of the system bit memory ($SB). P. 6-21
Displays the allocated address of the system word memory ($SW). P. 6-21
Function
Function
Function
Page
P. 6-8
P. 6-9
P. 6-10
P. 6-11
P. 6-13
P. 6-14
Page
P. 6-16
P. 6-16
P. 6-16
P. 6-17
P. 6-17
P. 6-18
P. 6-18
P. 6-19
Page
P. 6-20
P. 6-20
P. 6-20
P. 6-20
P. 6-20
P. 6-20
P. 6-21
P. 6-21