Netum NT-1228BL Manual page 68

6. Check the suffix hex value from the ASCII Chart. !- "2" "1"
7. Scan the 2 digit hex value from the Numeric Bar Codes.
8. Scan the output format to enable suffix output.
9. Scan the barcode then you will get AB123456789!
Example on how to add Combination Key suffix for barcode "123456789"
Add "Ctrl+P" on "123456789" as suffix
1.Scan command barcode of " Add Suffix" to add "Ctrl+P" as suffix.
2. Check the suffix hex value from the ASCII Chart. Ctrl+P - "9" "7" "5" "0"
3. Scan the 4 digits hex value from the Numeric Bar Codes.
Add Suffix
Enable Suffix output
Add Suffix
- 64 -