Advertisement
Quick Links
Visitor Aware Netum Barcode Scanner Setup Sheet
If you're using the Netum NT-1228BL handheld barcode scanner with the Visitor Aware web
kiosk, and would like to ensure scans for only valid identification cards, and QR codes, just plug
in your scanner to your computer, and scan the barcodes shown in the steps below.
In the event that the scanner does not seem to be working as expected, or does not scan
identification barcodes, refer to the "Reset to Factory Default Settings" section at the bottom of
this document.
Step 1: Set your sound preferences
Advertisement
Related Manuals for Netum NT-1228 BL
Summary of Contents for Netum NT-1228 BL
- Page 1 Visitor Aware Netum Barcode Scanner Setup Sheet If you’re using the Netum NT-1228BL handheld barcode scanner with the Visitor Aware web kiosk, and would like to ensure scans for only valid identification cards, and QR codes, just plug in your scanner to your computer, and scan the barcodes shown in the steps below.
- Page 2 Step 2: Disable all barcodes except programming codes Step 3: Enable PDF417 and QR codes...
- Page 3 2. Touch Home | Menu | Settings | Wireless & Networks | Bluetooth settings 3. Make sure the device has Bluetooth “On”. 4. In the list of found devices, select “Netum Bluetooth”. Tap Pair. 5. The scanner will make one long beep after bluetooth is paired and the LED light will turn to solid blue (no blinking).
- Page 4 Reset to Factory Default Settings Src: NT-1228BL Manual...
Need help?
Do you have a question about the NT-1228 BL and is the answer not in the manual?
Questions and answers