STARTING THE MACHINE
Make sure the power button is not pressed and the machine is turned off.
1
Open the coffee bean hopper by
pressing the button on the lid. Fill
the bean hopper with coffee
beans.
4
Fill the tank with fresh drinking
water. Do not exceed the "max"
level indicated on the water tank.
Once fi lled place the tank back
into the machine.
7
Press the power button to the
"On" position.
BEFORE A LONG PERIOD OF INACTIVITY, AND BEFORE THE MACHINE IS RESTAR-
TED, PLEASE CHECK THE RELEVANT INFORMATION IN THE CLEANING AND MAIN-
TENANCE SECTION.
2
Close the lid pushing it down
completely.
5
Insert the plug into the socket
located on the back of the
machine and insert the other end
into a power outlet with suitable
current.
BEFORE PERFORMING ANY OPERATION, COMPLETE
THE INSTALLATION (PAGES 6 – 7).
TO ADJUST THE WATER HARDNESS LEVEL AND SET
THE INTENZA AROMA SYSTEM SEE THE «WATER
HARDNESS MENU» ON PAGE 22.
INSTALLATION
3
Remove the water tank.
We recommend installing the
water fi lter (see page 7).
6
Place a container beneath the hot
water spout.
5