Table of Contents
Advertisement
3.9.2 To do the basic settings
Before you start the product for the first time, you
must do the basic settings and calibrate the
product.
1.
Push the STOP button.
2.
Set the Main switch to 1.
3.
Push the arrow buttons and the OK button.
language, country, date, time and set
Select
a PIN code.
Note: It is not possible to use 0000 as PIN
code.
4.
Put the product in the charging station.
5.
Push the START button and close the hatch.
The product then moves away from the charging
station and stops, while it calibrates some of the
product settings.
3.10 To do the product settings
The product has factory settings but the settings
can be adapted to each work area.
3.10.1 To get access to the menu
1.
Push the STOP button.
2.
Enter the PIN code on the keypad.
3.
Push the MENU button.
3.10.2 To do the timer settings
3.10.2.1 To calculate the timer setting
1.
Calculate the dimension of your lawn in m
2
yd
.
2
2
2.
Divide the m
/ yd
of the lawn with the
approximate operation capacity. Refer to
table below.
3.
The result is equal to the number of hours
that the product must operate each day.
Note: The operation capacity is approximate and
timer settings can be adjusted.
22 - Installation
Model
R160Li, R160LiC
Example: A lawn of 500 m
R160Li, R160LiC.
2
500 m
/ 70 ≈ 7 h.
2
600 yd
/ 84 ≈ 7 h.
Days /
h / day
week
7
7
3.10.2.2 To set the timer
1.
Do steps 1–3 in
on page 22 .
2.
Use the arrow buttons and the OK button to
move through the menu structure
Overview Timer settings .
3.
Use the arrow buttons and the OK button to
select the day.
4.
Use the arrow buttons to select the time
period.
5.
Push the OK button.
6.
Enter the time with the number buttons. The
product can cut the grass 1 or 2 periods
each day.
2
/
7.
If the product must not cut grass on a
specified day, unselect the box adjacent to
the 2 time periods.
3.10.2.3 To copy the timer setting
1.
Do steps 1–3 in
on page 22 .
2.
Use the arrow buttons and the OK button to
move through the menu structure
Overview Timer settings > Overview > Copy
to .
3.
Use the arrow buttons and the OK button to
copy the timer setting. You can copy the
timer settings day to day or for the full week.
Approximate operation ca-
2
2
pacity, m
/ yd
/ h
70 / 84
2
2
/ 600 yd
, cut with a
Timer settings
08:00 - 15:00 / 7 am
- 3 pm
To get access to the menu
Timer >
To get access to the menu
Timer >
1025 - 001 - 23.01.2019
Hide quick links:
Advertisement
Table of Contents
