Sales Order Screen; Figure 35 - Sales Order Screen - York YD Series Operation Manual

FORM 160.69-O1
ISSUE DATE: 9/30/2012
Overview
This screen allows definition of the sales order parame-
ters. The Commissioning date is entered by the YORK
Service Technician at the time of chiller commission-
ing. These values should never be changed or entered
by anyone other than a qualified Service Technician.
Entry instructions are included in the YORK Service
Manual 160.69-M1. The remainder of the values are
entered at the YORK Factory during the manufacturing
of the chiller.
Display Only
Model Number
Factory defined model number of the chiller system.
Panel Serial Number
Factory defined serial number for the micropanel.
Chiller Serial Number
Factory defined serial number for the chiller system.
YORK Order Number
Factory defined order number under which the chiller
was sold.
System Information
Factory defined conditions for which the chiller was
originally rated and sold. The Kilowatts Input is the
total for the chiller.

FIGURE 35 - SALES ORDER SCREEN

JOHNSON CONTROLS

SALES ORDER SCREEN

Condenser and Evaporator Design Load
Information
Factory defined description of the condenser and evap-
orator configuration at time of shipment.
Nameplate Information
Factory defined information about the chiller motor
configuration. The Full Load and Inrush Amps is the
value for each motor.
Programmable
Commissioning Date
Access Level Required: SERVICE
Define the date at which the chiller was commissioned.
Job Name and Location
Access Level Required: SERVICE
Factory defined job name and location the chiller is
destined for.
Print
Access Level Required: VIEW
This generates a listing of the Sales Order data
Navigation
Home
Access Level Required: VIEW
Causes an instant return to the Home Screen.
Setup
Access Level Required: VIEW
Return to the Setup Screen.
SECTION 2 – OPTIVIEW CONTROL CENTER
2
00320VIPC
97