Table of Contents
Advertisement
FORM 155.33-ICOM2.EN.GB
ISSUE DATE:12/4/2017
FIGURE 26 - MAIN SCREEN
OPERATING STATUS
The Main screen is the ONLY screen where you can
start or stop the chiller-heater. The two buttons in the
lower left corner of the screen are:
• OPER. and STOP: Press the appropriate button
to start or stop the chiller-heater.
When you press the OPER. button while the chiller-
heater is stopped, or STOP while the chiller-heater is
operating, a confirmation message appears. Press YES
to continue. Or, press the NO button to cancel. See the
example shown to the right.
JOHNSON CONTROLS
MAIN SCREEN
SECTION 6 – OPERATION
LD21527
LD21526
71
6
Advertisement
Table of Contents
Troubleshooting
