Lock/ Unlock The Charger; Gesture Sensor; Face Recognition Authentication; Rfid Authentication - Wallbox QUASAR User Manual

Lock / Unlock the charger
The Wallbox Quasar can be locked to prevent unauthorized use. You can lock it by moving your hand to
the left and unlock it with face recognition. You can also lock and unlock your charger using the Wallbox
app and the myWallbox portal.

Gesture sensor

Your Wallbox Quasar has a gesture sensor so that you can control it with simple gestures without having
to use external devices. Make sure you move your hand close to the charger near the sensor shown in
the image below.
GESTURE
SENSOR

Face Recognition Authentication

Note: This feature is only available when your Wallbox Quasar is connected to the Internet. Before
using this feature you need to add your front profile photo in your myWallbox account using the Wallbox
app (see "Edit your profile" section). Now you can unlock your Wallbox Quasar using face recognition
authentication. To do so, use the corresponding gesture to start the process and the charger will take
photo of you automatically. The camera icon will appear on the charger screen. It may take a few seconds
for the charger to unlock.

RFID authentication

In order to use this feature, you only need to enter the RFID code printed on the provided Wallbox RFID
card into your myWallbox account through the myWallbox portal. Note that only the Administrator of the
charger can enter RFID codes in charger users' accounts. The RFID authentication requires the charger
to be online in order to update the information about authorized users. It may take up to 30 seconds for
the charger to update user information after a modification in the myWallbox account. Now the system
is ready to let user unlock the charger with the RFID card. To do this, the RFID card must be hold in front
of the RFID reader of the charger at a distance below 5 cm.
17
• Move your hand upwards to increase the charging power.
• Move your hand downwards to reduce the charging power.
• Move your hand to the left to lock the charger. This
gesture is enabled as soon as the user has connected to
the charger with the Wallbox app.
• While charging, move your hand to the right to pause
charging. Move your hand to the right again to resume
the charging.
• Move your hand in any direction to turn on the screen or
to start face recognition authentication.