Advertisement
Distributol
Ignition system with contact brcaker assembly
I
,1
't
B3
Replacing contact breake. points
crease cams after installing new points.
Turn crankshaft untilfibre heel on contact breaker is on
Adjust gap to 0.i10 mm on B 17-823.
0.35 mm on 820
Apply 1 2 drops of engine oil to spindle wick
(
(
t
T
B4
Adjust dwell to 59-65"
Volvo lMonotester or dwell meter'
neduce points gap to decrease dwellangle and increase
gap to increase angle,
Refit rotor and distributor cap,
B5
Check dwell angle at 42 t/s (2500 r/min)
tl dwell angle differs by more than 2" from reading at
idle, check distributor for wear.
{ )
6
2A
Advertisement
