Table of Contents
Advertisement
Audio Encryption Improvements
•
Firmware 4.x and newer has improved audio encryption, so make sure to update all Shure devices using encryption to the
same major firmware version.
Web Applications Removed
•
With firmware 4.x and newer, Shure Designer software is the only way to control the ANIUSB-MATRIX.
•
You can access basic settings for the device by opening it from the Shure Web Device Discovery tool, but you must use
Designer for full control.
•
Download Designer at shure.com/designer.
Hardware and Installation
Rear Panel
① Level Indicators (Signal/Clip)
Tri-color LEDs indicate the audio signal level for the analog channels and connectivity status for the USB channel. Adjust out-
put levels in Shure Designer software to avoid clipping.
Analog Input/Output
LED State
Off
Green
Yellow
Red
Note: The input and output LEDs stay off when metering is set to Post-gain.
USB Audio
LED State
Off
Audio Signal Level
less than -60 dBFS
-59 dBFS to -24 dBFS
-23 dBFS to -1 dBFS
0 dBFS or more
Status
No USB device connected
Shure Incorporated
7/31
Advertisement
Table of Contents
