Table of Contents
Advertisement
Installing Underneath a Table
1.
Hold the tray in the desired location under a table.
2.
Use a pencil to mark the location of the mounting holes on the table.
3.
Drill 4 holes for the screws. The diameter of the holes in the tray are 7.1 mm.
4.
Install the components into the tray.
5.
Install with 4 screws to secure the tray underneath the table.
Controlling Devices with Shure Designer Software
To control this device's settings, use Shure Designer software. Designer enables integrators and system planners to design au-
dio coverage for installations using MXA microphones and other Shure networked devices.
To access your device in Designer:
1.
Download and install Designer on a computer connected to the same network as your device.
2.
Open Designer, and check that you're connected to the correct network in Settings.
3.
Click Online devices. A list of online devices appears.
4.
To identify devices, click the product icon to flash the lights on a device. Select your device in the list and click Config-
ure to control device settings.
Learn more at shure.com/designer.
You can also access basic device settings using Shure Web Device Discovery. Full control is available in Designer.
Device Identification
To identify the hardware by flashing the lights, select the Identify button in the device options section.
Overview of Shure Conferencing Devices
Shure offers a range of connectivity options for conferencing. MXA microphones, audio processors, and network interfaces all
use Dante to send audio over standard IT networks. You can use Shure's free
and route audio between them.
As you plan out a system, think about what other devices you need to connect to and whether you'll need extra inputs/outputs
in the future.
Device
MXA910
MXA310
Purpose
Ceiling array microphone
with IntelliMix DSP
Table array microphone
Designer software
Physical Connections
1 PoE port
1 PoE port
Shure Incorporated
to control most Shure devices
Dante I/Os
8 individual channel outputs
or 1 automix channel output
with IntelliMix DSP
1 AEC reference input
4 individual channel outputs
or 1 automix channel output
12/31
Advertisement
Table of Contents
