Power Over Ethernet (Poe); Reset; Installation And Rack Mounting - Shure ANIUSB-Matrix User Manual

Audio network interface
Hide thumbs Also See for ANIUSB-Matrix:
Table of Contents

Advertisement

LED Status
Red
⑦ Dante Network Port
Connects to a network switch to receive Dante audio, Power over Ethernet (PoE), and data from the control software.
⑧ Reset Button
Resets the device settings back to the factory default.

Power Over Ethernet (PoE)

This device requires PoE to operate. It is compatible with both Class 0 and Class 3 PoE sources.
Power over Ethernet is delivered in one of the following ways:
A network switch that provides PoE
A PoE injector device

Reset

The reset button is located inside a small hole in the rear panel. Use a paperclip or other small tool to press the button.
There are two hardware reset functions:
Network reset (press button for 4-8 seconds)
Resets all Shure control and audio network IP settings to factory defaults
Full factory reset (press button for longer than 8 seconds)
Restores all network and Designer settings to the factory defaults.
Software Reset Options
To simply revert settings without a complete hardware reset, use one of the following options:
Reboot Device:Power-cycles the device as if it were unplugged from the network. All settings are retained when the device is
rebooted.
Default Settings: To revert audio settings back to the factory configuration (excluding Device Name, IP Settings, and Pass-
words), select Load Preset and choose the default settings preset.

Installation and Rack Mounting

Two mounting solutions are available for installing the Audio Network Interface:
CRT1 19" Rack Tray (optional accessory): Supports up to 3 devices; mountable in a rack or under a table
Single-unit Mounting Tray (included accessory): Supports a single device for mounting under a table
Securing the Devices
Use the included screws from the mounting hardware kit to secure the Audio Network Interfaces. Audio Network Interfaces can
be mounted to face either direction. Insert the screws from the bottom in the appropriate holes, according to the following dia-
grams:
Activity
Encryption error. Possible causes:
Encryption is enabled on one device and not on another
Passphrase mismatch
Shure Incorporated
9/31

Advertisement

Table of Contents
loading

Table of Contents