1.5 Network Bridge Function
This projector is equipped with the NETWORK BRIDGE function to perform
mutual conversion of a network protocol and a serial interface.
By making use of the NETWORK BRIDGE function, a computer connected to the
projector via wireless or wired LAN is able to control an external device via
RS-232C communication using the projector as a network terminal.
Computer
Wireless
LAN
CONTROL port
1.6 Other Functions
1.6.1 E-mail Alerts
e-mail addresses when the projector detects a certain condition that requires
maintenance or detects an error.
1.6.2 Projector Management using SNMP
The SNMP (Simple Network Management Protocol) enables to manage the
projector information, which is a failure or warning status, from the computer on
the network. The SNMP management software will be required on the computer
to use this function.
DWU951/DHD951/DWX951/DXG1051/
DWU851/DHD851/DWX851 Network Quick Setup Guide
TCP/IP data
Protocol change
Wired LAN
LAN cable
RS-232C
RS-232C cable
WIRELESS port
(USB wireless adapter)
LAN port
5
Serial data
External device
020-000660-03 Rev. 1 (09-2014)