Christie DWU951 User Manual page 14

SSID SCAN LIST function
The connection can be set up by selecting from SSID SCAN LIST without setting
SSID and ENCRYPTION in WIRELESS SETUP. The procedure of connecting by
SSID SCAN LIST is as follows.
1) Select SSID SCAN LIST in WIRELESS SETUP on NETWORK menu.
The list of SSID in wireless network is displayed.
2) Select SSID in wireless network that you want to connect in SSID SCAN LIST.
The display to enter the encryption key appears if it is encrypted.
Enter the encryption key by using software keyboard.
3) The icon indicating "connected" (
when the connection is complete.
NOTE
Transmission speed may be slow depending on the settings of an access point.
If the projector and the computer exist in the same network (i.e., same network
gateway must be set. Consult with the network administrator in detail.
administrator when connecting to the existing network.
Authentication is not supported. The authentication with an access point succeeds
and it is regarded that the connection is established normally even when entering
illegal encryption key due to Open System Authentication, but data cannot actually
be transmitted.
DWU951/DHD951/DWX951/DXG1051/
DWU851/DHD851/DWX851 Network Quick Setup Guide
) is displayed in SSID SCAN LIST screen
12
020-000660-03 Rev. 1 (09-2014)