Download
Share
Print this page
Nordson Kinetix Instruction Sheet
  1. Manuals
  2. Brands
  3. Nordson Manuals
  4. Industrial Equipment
  5. kinetix
  6. Instruction sheet
Nordson Kinetix Instruction Sheet

Nordson Kinetix Instruction Sheet

Puller link upgrade kit
Hide thumbs Also See for Kinetix:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Introduction
New Part
Bushing Retainer
1045778
Adapter Link
1045777
Spacer Block
336621
NOTE: The spacer block part number, 336621, has been reconfigured to allow for the new longer slotted
bushing retainer. To use the new bushing retainer and adapter link you must order the new spacer block.
NOTE: The newly designed spacer block, part 336621, can also be used with the obsolete longer
bushing retainer, part 336695, and obsolete puller link, part 336624, if necessary.
E 2004 Nordson Corporation
r
Kinetix
Puller Link Upgrade Kit
WARNING: Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
Two kits are available to upgrade Kinetix automatic spray guns
manufactured before January 2004. The upgrade kits allow for simplified
maintenance and repair of a Kinetix automatic spray gun.
The Puller Link Kit includes a bushing retainer and puller link adapter.
The Upgrade Kit includes a spacer block, bushing retainer, and puller
link adapter.
The three new parts can be ordered separately but you cannot use one part
without the other two. Refer to Table 1 for an illustration of the new parts.
Table 1 Upgrade Kit Information
Replaces Part
(Now obsolete)
Bushing Retainer
336695
Short
Puller Link
336624
Instruction Sheet
Included in
Puller Link Kit,
part 1045981
n
Long
n
P/N 1047147A
Included in
Upgrade Kit,
part 1045984
n
n
n
Part 1047147A

Advertisement

loading

Related Manuals for Nordson Kinetix

Summary of Contents for Nordson Kinetix

  • Page 1 Follow the safety instructions in this document and all other related documentation. Introduction Two kits are available to upgrade Kinetix automatic spray guns manufactured before January 2004. The upgrade kits allow for simplified maintenance and repair of a Kinetix automatic spray gun.

  • Page 2: Installation

    CAUTION: Do not overtighten threaded parts. Failure to observe this caution will result in equipment damage. Prepare the Spray Gun 1. Turn off the power supply. Refer to the Kinetix Automatic Gun Power Supply manual. Ground the spray gun’s electrode to remove any residual charge.
  • Page 3 Kinetix Puller Link Upgrade Kit 1300556A Figure 1 Install the New Kit Parts 1. Connecting rod 6. Puller link 11. Threaded stud 2. Piston block body 7. Pull shaft 12. New puller link adapter 3. Large face-seal O-rings 8. Extension 13.
  • Page 4 Kinetix Puller Link Upgrade Kit Install the New Kit Parts (contd) 5. Carefully remove the threaded stud (11) from the end of the pull shaft. NOTE: It may be necessary to remove the pull shaft from the extension to remove the threaded stud. If so, follow this procedure.
  • Page 5 Kinetix Puller Link Upgrade Kit Assemble the Spray Gun 1300557A Figure 3 Align the Puller Link Adapter and Bushing Retainer 1. Puller link adapter 3. Bushing retainer 2. Pins 1. See Figure 3. Align the pins (2) on the new puller link adapter (1) with the slots in the new bushing retainer (3) and place the spacer against the extension.

  • Page 6: Upgrade Kit

    NOTE A: The newly designed spacer block, part 336621, can also be used with the obsolete bushing retainer, part 336695, and obsolete puller link, part 336624, if necessary. NS: Not Shown Issued 2/04 Original copyright date 2004. Kinetix, Nordson, and the Nordson logo are registered trademarks of Nordson Corporation. Part 1047147A E 2004 Nordson Corporation...