2.1 Overview
The Web Configurator is an HTML-based management interface that allows easy VMG setup and
management via Internet browser. Use Internet Explorer 11 and later versions or Mozilla Firefox 67.0.2 and
later versions or Safari 5.0 and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your
Windows 10.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
2.1.1 Accessing the Web Configurator
Make sure your VMG hardware is properly connected (refer to the Quick Start Guide).
1
Make sure your computer has an IP address in the same subnet as the VMG. Your computer should
2
have an IP address from 192.168.1.2 to 192.168.1.254. See
Launch your web browser. If the VMG does not automatically re-direct you to the login screen, go to
3
http://192.168.1.1.
A login screen displays. Select a language you prefer.
4
To access the administrative Web Configurator and manage the VMG, type the default username
5
admin and the randomly assigned default password (see the device label) in the login screen and click
Login. If you have changed the password, enter your password and click Login.
Figure 6 Login Screen
The Web Configurator
VMG4005-B50A/B60A User's Guide
C
H A P T E R
. Web pop-up blocking is enabled by default in
VMG
Section 18.4 on page 69
14
2
for details.