ZyXEL Communications VMG4005-B60A User Manual page 41

The following table describes the labels in this screen.
Table 16 Maintenance > User Account > Add/Edit
LABEL DESCRIPTION
Active Select Enable or Disable to activate or deactivate the user account.
User Name Enter a new name for the account. The User Name must contain 1 to 15 characters, including 0
to 9, a to z, and !@#%*()-_+=~,.{}[]\. Spaces are not allowed.
Password Type your new system password. The Password must contain 6 to 64 characters, including 0 to 9
and a to z. Note that as you type a password, the screen displays a (*) for each character you
type. After you change the password, use the new password to access the VMG.
Verify New Type the new password again for confirmation.
Password
Retry Times Enter the number of times consecutive wrong passwords can be entered for this account. 0
means there is no limit.
Idle Timeout Enter the length of inactive time before the VMG will automatically log the user out of the web
configurator.
Lock Period Enter the length of time a user must wait before attempting to log in again after a number if
consecutive wrong passwords have been entered as defined in Retry Times.
Group Specify whether this user will have Administrator or User privileges. Administrator and User
privileges are mostly the same, but the System settings will only display when you log in as an
Administrator.
Protocol Select the network protocol for operating network services over an unsecured network. Only
HTTP&HTTPS is available when User is selected in the Group field.
Note: To use the Protocol Control feature for each user account under Remote
Management > MGMT Services, please enable the specified service.
Cancel Click Cancel to restore your previously saved settings.
OK Click OK to save your changes.
Chapter 11 User Account
VMG4005-B50A/B60A User's Guide
41