Lenovo ThinkSystem HR650X User Manual And Hardware Maintenance Manual page 26

1. Lift up the PCIe cage module from chassis
2. Use screwdriver to release the screws on the PCIe cage
3. Pull out the PCIe cage
To remove GPU card
1. Lift up the riser module
2. Pull out the plastic supporter (Step 1)
3. Remove the GPU card (Step 2)
To reinstall, reverse the steps above.
Special Note: Refer to the table below for the specifications and the assigned slots for PCIe cards supported by HR650X.
Slot no. Supported size
Full-height,
1
Full/half-length
Full-height,
2
Full/half-length
Full-height,
3
half-length
Half-height,
4 half-length
Full-height,
5 Full/half-length
Full-height,
6 Full/half-length
Slot specifications Remark
×8/x16
Support 1xCPU config
×8
Support 1xCPU config
×8
Support 1xCPU config
×8
Support 1xCPU config
×8/x16
Does not support 1xCPU config
×8
Does not support 1xCPU config
26