Lenovo ThinkSystem HR650X User Manual And Hardware Maintenance Manual page 45

One Blank line
Legacy Console Redirection
Legacy Console Redirection Settings
One Blank line
Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
Console Redirection
Console Redirection Settings
© Copyright Lenovo 2017
Recorder Disabled/En
Mode abled
Resolution Disabled/En
100x31 abled
Legacy OS 80x24/80x2
Redirection 5
Resolution
Putty VT100/LIN
KeyPad UX/XTERM
R6/SCO/ES
CN/VT400
Redirection Always
After BIOS Enable/Boo
POST tLoader
Legacy COM0/CO
Serial M1
Redirection
Port
Disabled/ Enabled
Out-of- COM0/CO
Band Mgmt M1
Port
Terminal VT100/VT1
Type 00+/VT-
UTF8/ANSI
With this mode enabled only text will be sent. This
is to capture Terminal data.
Enables or disables extended terminal resolution
On Legacy OS, the Number of Rows and Columns
supported redirection
Select FunctionKey and KeyPad on Putty.
The Settings specify if BootLoader is selected then
Legacy console redirection is disabled before
booting to Legacy OS. Default value is Always
Enable which means Legaacy console Redirection is
enabled for Legacy OS.
Legacy Console Redirection Settings
Select a COM port to display redirection of Legacy
OS and Legacy OPROM Messages.
Console Redirection Enable or Disable.
The settings specify how the host computer and
the remote computer (which the user is using) will
exchange data. Both computers should have the
same or compatible settings.
Microsoft Windows Emergency Management
Services (EMS) allows for remote management of a
Windows Server OS through a serial port.
VT-UTF8 is the preferred terminal type for out-of-
band management. The next best choice is VT100+
and then VT100. See above, in Console Redirection
Settings page, for more Help with Terminal
45