Table of Contents
Advertisement
Procedure to connect to the Streaming Server via the Network port
The following procedure will allow the installer to setup the Streaming Server via the GUI
1. Connecting a standard CAT5e/6 cable from HDIP Network port to a PC and power on HDIPSS.
2. Set the PC via the Control Panel to 192.168.1.10. Below are the instructions for doing these.
a. Start- Settings
3. Select 'Network & Internet'
NACE:
610-429-1511
| sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0
Page 8
Advertisement
Table of Contents
Need help?
Do you have a question about the DT-HDIPSS and is the answer not in the manual?