Inspect the package before starting installation to ensure there is no damage and all supplied contents are present. Contact your distributor or dealer should the device be damaged or package contents are incomplete. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 3...
PRODUCT DESCRIPTION Data-Tronix’s DT-HDIPSS HD IP Streamer allows the user to stream any one audio/video source over an IP Network to multiple TV's or connected computers within the IP Network. The IP Streamer accepts a HDMI, component, or composite video input and the unit is designed to deliver a rich HD/SD streaming experience for its users deploying MPEG-2 or MPEG-4 standards.
9.29” x 6.10” x 1.37” (236mm x 155mm x 35mm) Weight 2 lbs. and 1.1575 oz. (940g) *Manufactured under license from Dolby Laboratories. * Specifications subject to change without notification. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 5...
2. If a DHCP server is present in the private network, the HDIP streaming server will use the IP address assigned by the DHCP server. 3. If no DHCP server is present, the HDIP streaming server will use an assigned IP address (192.168.1.9). NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 6...
Indicates device is encoding audio using MPEG-1 Layer 2 Indicates device is encoding audio using AAC Dolby Digital Indicates device is encoding audio using Dolby Digital recording IP NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 7...
1. Connecting a standard CAT5e/6 cable from HDIP Network port to a PC and power on HDIPSS. 2. Set the PC via the Control Panel to 192.168.1.10. Below are the instructions for doing these. a. Start- Settings 3. Select 'Network & Internet' NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 8...
Page 10
8. Select “Internet Protocol Version 4 (TCP/IPV4)” 9. Select “Properties” 10. Select “Use the following IP address:” NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 10...
Page 11
Overview / Welcome page displays current status of the encoder including Input type, Output format type, Output Bitrate, Actual Output, Encoder Status, and # of connected Clients. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 11...
Enter the User Name and Password then click Login. User Name: admin Default Password: Admin123 Note: User Password can be changed – See Administration Page. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 12...
Encoder Setup The DT-HDIPSS provides the user with a variety of parameter settings. Many of the default settings will allow the user to quickly start streaming video. Only some of the settings shown will require any change. Video Control Select Video Input Setting the device to Auto Detect allows the Encoder to automatically recognize which video source the user is using.
H.264 Video Bitrates HD: 2~10 Mbps (default- 10 Mbps) SD: 1~4 Mbps (default- 4 Mbps) The DT-HDIPSS allows the user to Set the Video Bitrate desired within the defined parameters offered. Set or use the default settings as required. Select Aspect ratio...
Application Note: If your Video Source is HDMI and you require an alternate Audio Source – Select Analog. This will force the DT-HDIPSS to use the L/R RCA Audio Inputs as the Audio Source. Select Audio Output Type Use the drop-down tool to Select the Audio Format required.
Page 17
After pressing the 'Save and Confirm' button- the user will be brought back to the Overview page. Leaving the encoder page without saving changes will cause the previous settings to be used. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 17...
Streaming Setup The DT-HDIPSS can be setup to stream via HTTP (DLNA) directly from the network to the DLNA application on a DLNA Compliant Smartv, directly to a PC using Multicast (UDP/RTP/RTSP) or to a HDTV by using a compatible set top box, or by Unicasting (UDP/RTP/RTSP) to a PC.
Newly Added Functionality: The DT-HDIPSS can function as a Media Player via the use of a USB Drive while using RTSP streaming format. See RTSP Streaming. Broadcasting Select the Broadcasting Protocol as above drop-down list. The Broadcasting is Default: UDP Multicasting Enter Multicast Destination IP Address and Destination Port.
Make index of TS files to make the index. Please refer the instruction on the Notes below the Streaming Setup Page. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 20...
Page 21
See Specifications of file formats supported listed on page 5 (USB Media Player). Media Player Via USB Port Attach USB drive with supported file formats to the DT-HDIPSS to USB port on rear of device. Use “rtsp://device_IP_Address/<filename>” format for USB Media Player.
To set a Static IP- Uncheck ' Enable DHCP'. Enter IP Address, Subnet Mask, Default Gateway, and DNS Server. Default: DHCP Enabled. NTP Server To set NTP Server (if required) NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 22...
User MUST enter PORT ID as part of the IP address to Open GUI of device. Default SOAP Port: 8888 *** SAVE AND CONFIRM ALL CHANGES MADE ON THE NETWORK SETUP PAGE NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 23...
Page 25
Saving your configuration files We highly recommend you save your encoder configuration files. Simply Click the “Backup” button and the config files will be saved to you computer. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 25...
Page 26
Firmware Upgrade Use the Firmware Upgrade tools to locate 'Choose File' and 'Upload Image' Change Password Remember to Click 'Save and Confirm' button to save new password. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 26...
Step 4: Click 'Add' Image above shows Destination IP/Port listed in the Casting List window. Note: Click on an IP Address then 'Remove' to remove a Destination IP addresses. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 32...
Page 33
Step 7: File → Open Network Step 8: Enter Destination Port as shown. example: Destination IP address as shown in step 4 :169.254.244.133. Destination Port: 1234 RTP Example: NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 33...
Step 2: ***Save and Confirm *** Step 3: Open VLC media player Step 4: Select Media ==> Open Network..Step 5: Enter rtsp://169.254.5.57/VideoInput/ucast.ts Step 6: Click Open to stream. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 34...
Page 35
Step 2: ***Save and Confirm *** Step 3: Prepare and place MPEG-2 TS files on USB drive with file name suffix “.ts” Step 4: Attach USB stick to DT-HDIPSS USB port. Step 5: Open VLC media player Step 6: Select Media ==> Open Network..
Page 36
Step 7: Enter RTSP address/file name (example: “rtsp://169.254.5.57/t.ts”) Step 8: Click Open to stream. NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 36...
HDIP Streaming Server Notes PRODUCT NOTES: ITEM VALUE USER NAME / PASSWORD SERIAL NUMBER INSTALLATION DATE PURCHASE DATE DEVICE NAME FIRMWARE VERSION STREAMING METHOD NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | | DT-HDIPSS Manual v1.0 Page 37...