Safety Remarks - Simons Voss Technologies 3066 Manual

1.2. Safety Remarks

Read through the assembly instructions carefully and thoroughly before installing and
commissioning the shunt lock components. They contain important information on the
assembly, programming and operation.
The components are built in accordance with the latest state of the technology. Use them
only as instructed and when they are in perfect technical condition and are properly installed
according to the technical specifications
The manufacturer is not liable for damages that are caused by use that does not comply with
the directions.
Keep the documentation that comes with the product and system-specific notices in a safe
place.
Only trained experts are authorized to perform installation, programming and repair work.
Soldering and connection work anywhere in the entire system must be performed only when
the system is voltage-free.
Soldering work must be performed with a temperature-controlled soldering iron that is
electrically insulated from the power system.
Observe VDE safety regulations and regulations from the local electric utility.
Do not use the components in areas subject to explosion hazards or in areas with fumes that
dissolve metal or plastic.
DIN norms and the guidelines of VdS Class C must be adhered to.
VdS Version
VdS Shunt lock Function 3066
E5
Version: December, 2003