Backplane - ASROCK 1U2FH-4L User Manual

3.6 Backplane

The backplanes serve as the interfaces between the server board and the HDDs.
Before removing and installing the backplanes, power off the server and unplug the power
cord and make sure all 3.5" HDDs have been removed.
For the specification of the backplane, please refer to the Chapter 4.
Removing the Backplane
1. Remove all of cables connected to the backplane.
2. Loosen the securing screws on the backplane.
3. Lift the backplanes up from the chassis. Hold the backplane only by the edges.
28