Table of Contents
Advertisement
2.3 System Front Panel
HDD0
No.
Description
1
4 x 3.5" Hot-Swap HDD Trays (HDD0~HDD3)
2
2 x USB 2.0 Ports
3
Control Panel Buttons and LEDs
4
VGA Port
2.4 System Rear Panel
1
Redundant PSU 1+1:
Only one PSU is allowed to be removed while
the server is running.
No.
Description
1
2 x Power Supply Units (Redundant PSU 1+1)
*Server requires 1 working PSU, with 1 redundant PSU. You must have at least one active
supply, installed, functioning and connected to AC. Only one of the PSUs is allowed to be
removed while the server is running.
2
I/O Shield (depends on the specification of the server board)*
3
1 x PCI Express Slot 1 (on the riser card assembly)
*Supports Low profile and FHHL (Full High Half Length) PCIe cards
4
1 x LAN Mezzanine Card Slot
*Support for 1GbE x 2, 10GbE x2 or SFP+ (Fiber) x2
5
1 x PCI Express Slot 2 (on the riser card assembly)
*Supports Low profile and FHHL (Full High Half Length) PCIe cards
6
Rear Vent*
*The locations of I/O shield and rear vent may vary depending on the system and server board models.
1
HDD1
2
3
2
3
HDD2
HDD3
4
5
1U2FH-4L
4
6
7
Advertisement
Table of Contents
