Troubleshooting - ALDI Workzone Titanium+ Xfinity Li-ION 20V YLW6281D Instruction Manual

22

13. Troubleshooting

WARNING!You must remove the battery pack(1) before
commencing any cleaning, maintenance or inspection work
procedures on the appliance. Install the battery pack (1) to the machine
when safe to do so.
Symptom
The Wet & Dry
Vacuum suddenly
stops during
operation.
Suction
decreases
Noise of
vacuum
changes
and suction
decreases
Appliance will not
operate when the
tool is switched
on
For further inquiries or issues associated with your tool, call our
Customer Service on 1300 889 028 or email us at
info.aldi@positecgroup.com
AFTER SALES SUPPORT
1300 889 028 (toll free)
Possible Causes
Overload and battery
temperature too
high
Low battery capacity
Blocked hose (18)
Tank (6) has
reached 2/3 full or is
completely full with
waste and debris
HEPA filter (13) is
dirty and clogged
Tank (6) has
reached 2/3 full or is
completely full with
waste and debris
Incorrect On/Off
switch (8) mode
selected
Battery pack (1) is
not installed.
22
Solution
Relieve the load on the
machine immediately and
allow cooling for approx.
30 seconds by running the
machine on no-load.
Charge the battery pack.
Gently remove obstruction
using a long stick
Fully empty tank(6)
Clean the HEPA filter (13)
Fully empty tank (6)
Select the Mode "I" in the
On/Off switch (8)
Install the battery pack (1)
e-mail:
info.aldi@positecgroup.com
MODEL No.:
YLW6281D • 700234 • 01/2020