If you are not entirely satisfied with this Technical data product, please return it to your nearest ALDI store within 60 days from the date of purchase for a full refund or replacement, or take advantage of Assembly our after sales support by calling the supplier’s Customer Service Hotline.
Explanation of symbols NTS16 Explanation of Symbols Read the operating instructions to reduce the risk of injury. Class II symbol: This wet/dry vacuum cleaner is designed with dual insulation and does not need to be connected to an earthed power socket. Compliance with the Australian requirements.
Introduction NTS16 I. Introduction Congratulations on choosing to buy a FERREX product. ® All products brought to you by FERREX are manufactured to the highest ® standards of performance and safety, and as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty. We hope you will enjoy using your purchase for many years to come.
Introduction/Layout/Scope of delivery NTS16 In addition to the safety notes contained in the present operating instructions and the special regulations of your country, the generally recognised technical rules for the operation of this appliance must be observed. II. Layout (Fig. 1, 2, 3) 1.
NTS16 Scope of delivery/Intended use/Safety regulations Warranty Certificate (1x) Manual (1x) • Open the packaging and take out the appliance carefully. • Remove the packaging material as well as the packaging and transport bracing (if available). • Check that the delivery is complete. •...
Page 8
Safety regulations NTS16 supervision. • Never leave a machine which is ready for operation unattended at the workplace. • People and animals must not be vacuumed with the machine. • Do not vacuum any hot, incandescent, flammable, explosive materials, or those which endanger health. This includes hot ashes, petrol, sol- vents, acids or caustic solutions.
NTS16 Safety regulations/Technical data • Only plug the appliance into a socket which is safeguarded. • The device must only be connected to a mains socket via a residu- al-current circuit breaker (RCD) with a rated leakage current of not more than 30 mA.
Assembly NTS16 VII. Assembly m IMPORTANT! Prior to use, ensure that the device has been correctly and fully assembled. Unpacking (Fig. 1, 2, 3) 1 Release the locking hooks (4) and remove the machine head (2). The accessories are located inside the container (6). Only the plastic extension tubes (3x) are locat- ed outside the container (6), in the packaging.
Page 11
NTS16 Assembly Vacuuming: Connect the suction hose (12) to the suction hose port (7). To do so, slide the end of the suction hose (12) into the suction hose port (7). Make sure the plug-in fitting on the end of the suction hose (12) latches into the recess on the suction hose connection (7).
Operation NTS16 VIII. Operation m WARNING! Switch the device off if liquid or foam emerges with the exhaust air during wet vacu- uming. Switching on/off (fig. 1) Press the on/off switch (8): • Switch setting 0: Off • Switch setting I: On Dry vacuuming (Fig.
NTS16 Operation/Maintenance and cleaning Blowing (Fig. 3) Use the joint nozzle (16) for blowing applications to clean dust and dirt in hard to reach places. IX. Maintenance and cleaning Pull out the power plug before every maintenance operation. There is a risk of elec- trocution or of injury from moving parts.
Troubleshooting/Storage/Disposal and recycling NTS16 X. Troubleshooting Problem Possible Cause Action Check plug socket, cable, line, plug and fuse, where approp- Mains voltage is not present. riate, repair through electrical specialist. Appliance does not Defective On/Off switch. start. Worn carbon brushes. Repair through customer service.
WET & DRY VACUUM CLEANER Warranty Details REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion.
Page 16
NTS16 AFTER SALES SUPPORT support@scheppach.com.au 1300 855 831 MODEL: NTS16 PRODUCT CODE: 706650 10/2021...
Please be assured though, refurbished parts or replacements are only used where they meet ALDI’s stringent quality specifications. If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint.
Page 18
NTS16 AFTER SALES SUPPORT support@scheppach.com.au 1300 855 831 MODEL: NTS16 PRODUCT CODE: 706650 10/2021...