ALDI Workzone Titanium+ Xfinity Li-ION 20V YLW6281D Instruction Manual page 15

8.2 Wet vacuuming & Dry vacuuming
NOTE: Never use the wet and dry vacuum without the HEPA filter
installed.
WARNING: This wet and dry vacuum is not suitable for the
vacuuming of combustible liquids.
1) Ensure the tank (6) is completely dry and free from dust and dirt.
2) Always ensure that the HEPA filter (13) is secure.
3) Make sure the correct wet vacuuming or dry vacuuming
accessories are fitted according to the required working condition:
* Wide nozzle tool (16) can be used to vacuum spilled liquids or dry
waste from carpets or hard floors. (See Fig. G1, G2).
* Dusting brush (14) can be used to vacuum dust from keyboards or
other items that collect dust. (See Fig. G3).
* Crevice tool (15) can be used to vacuum small liquid spills or dry dirt
from corners, gaps or other hard to reach places. (See Fig. G4)
4) For dust extraction, the 1.8m Heavy-Duty crush resistant vacuum
hose (18) can connect to dust extraction outlets of AC/electric power
tools.(See Fig. G5)
5) Make sure the battery pack (1) is installed.
6) Press the "I" on the On/Off switch (8) to turn on the vacuum.
WARNING! Check the tank (6) regularly and empty the
waste collected when it is about 2/3 full.
WARNING! When wet vacuuming, the Safety float valve
(21) closes when the maximum tank (6) level is reached. In
doing so, the suction noise of the vacuum will change and
become louder. When this happens, you must switch off the
vacuum and empty the tank (6).
AFTER SALES SUPPORT
1300 889 028 (toll free)
15
e-mail:
info.aldi@positecgroup.com
MODEL No.:
YLW6281D • 700234 • 01/2020
15