Troubleshooting; Storage; Disposal And Recycling - ALDI Ferrex NTS16 User Manual

AUS
Troubleshooting/Storage/Disposal and recycling
X. Troubleshooting
Problem
Appliance does not
start.
Low or lack of
suction.
Dust or dirt is
blowing out of the
device.
XI. Storage
• Clean and empty the appliance before storing.
• Drain all the water from the appliance before storing.
• Ensure that children cannot reach the appliance.
• Store the appliance and its accessories in a frost-free room.
XII. Disposal and recycling
The appliance is supplied in packaging to prevent it from being damaged in transit.
The raw materials in this packaging can be reused or recycled. The appliance and its
accessories are made of various types of material, such as metal and plastic. Never
place defective appliance in your household refuse. The appliance should be taken to
a suitable collection center for proper disposal.
If you do not know the whereabouts of such a collection point, you should ask in your
local council offices.
18
1
 support@scheppach.com.au
MODEL: NTS16 PRODUCT CODE: 706650 10/2021
Possible Cause
Mains voltage is not present.
Defective On/Off switch.
Worn carbon brushes.
Defective motor.
Hose system or nozzles
blocked.
Container open.
Container full.
Filter are not assembled.
Action
Check plug socket, cable, line,
plug and fuse, where approp-
riate, repair through electrical
specialist.
Repair through customer
service.
Remove obstructions and
blockages.
Close container.
Empty container.
Assemble the the filter.
AFTER SALES SUPPORT

NTS16
1300 855 831