Table of Contents
Advertisement
ASP12-ES
Cleaning
It is recommended to clean the appliance after each use.
Never direct a water jet against the appliance, nor clean the appliance under
flowing water. This could give rise to the danger of electric shock and damage
the appliance!
Always keep the appliance clean. Do not use any detergents or solvents.
• Always keep the ventilation slots clean and free from dirt and dust.
• Clean the container (7) with a damp cloth.
• Wash the foamed plastic filter (12) with lukewarm water and soap and allow to dry.
• Beat the dust out of the additional filter (16) and clean it with a paint brush or hand
brush.
• Replace the paper bag (13) when full.
Replacement parts
Replacement parts can be ordered (e.g. paper bag, filter) at the After Sales Support.
X. Troubleshooting
Problem
Appliance does not
start.
Low or lack of
suction.
Dust or dirt is blow
out of the device.
AFTER SALES SUPPORT
1300 855 831
Possible Cause
Mains voltage is not present.
Defective On/Off switch.
Worn carbon brushes.
Defective motor.
Hose system or nozzles
blocked.
Container open.
Container full.
Filter are not or not correctly
assembled.
MODEL: ASP12-ES PRODUCT CODE: 62361 10/2018
Maintenance and cleaning/Troubleshooting
Action
Check plug socket, cable, line,
plug and fuse, where approp-
riate, repair through electrical
specialist.
Repair through customer
service.
Remove obstructions and
blockages.
Close container.
Empty container.
Use missing filters or check the
correct position of the filter.
support@scheppach.com.au
AUS
17
Advertisement
Table of Contents
