Makita DCG140 Instruction Manual page 7

Lighting up the lamp
CAUTION:
directly.
1
1. Lamp
keeps on lighting while the switch trigger is being pulled.
switch trigger is released.
NOTE:
lamp. Be careful not to scratch the lens of lamp,
or it may lower the illumination.
Cool down the tool fully before operating again.
Drip preventive function
trigger is released. It releases the pressure of the caulk-
ing material and prevents dripping.
ASSEMBLY
CAUTION:
the battery cartridge is removed before carrying
out any work on the tool.
bench when carrying out any assembling work.
Installing holder joint
reverse.
NOTE:
accessory), short holder (300ml) and long
accordingly.
Installing rod and piston
A
-
Insert the rod into the slit of the tool.
procedure in reverse.
7 ENGLISH
A
B
C
B C