[Recording] Menu - Panasonic AG-CX7 Operating Instructions Manual

[LEVEL GAUGE]
[LEVEL GAUGE]
Switches display/hide of the level gauge.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[LEVEL GAUGE RESET]
Sets the horizontal and vertical reference value set by [LEVEL GAUGE SET] in the USER button to the factory setting.
The items that can be selected are as follows.
≥ [YES], [NO]

[RECORDING] menu

Sets the various items in the recording function.
[FORMAT MEDIA]
Formats the memory card in the specified card slot.
All data will be deleted when the card is formatted. Save any important data to a computer, etc. (l 169)
The items that can be selected are as follows.
≥ [SLOT1], [SLOT2]
[CLIP NAME]
[CAM INDEX]
Sets the CAM INDEX used for recorded MOV format/MP4 format file names.
Set one upper case alphabetical character. This is used as a value to be stored in the volume label of the memory card.
The items that can be set are as follows.
≥ [A]...[Z]
(Factory setting: [A])
[NEXT CARD COUNT]
Sets the CARD COUNT used for recorded MOV format/MP4 format file names.
In the following cases, the setting value in [NEXT CARD COUNT] is stored in the volume label of the memory card together with the [CAM INDEX] setting
value as CARD COUNT. Also, the setting value will increase one after storing. ([001] returns after [999])
≥ When formatted the memory card
≥ When recorded to the memory card where CARD COUNT is not stored in the volume label
The items that can be set are as follows.
≥ [001]...[999]
(Factory setting: [001])
CX10
[FILE SPLIT]
Selects the split method of the file in P2 format to be recorded.
The items that can be selected are as follows.
≥ [ONE FILE], [SPLIT]
(Factory setting: [SPLIT])
@ NOTE
0 When using a microP2 card with 32 GB or less, it is split every 4 GB regardless of selected item.
0 A clip of 4 GB or more recorded by selecting [ONE FILE] cannot be copied to a microP2 card with 32 GB or less.
[2 SLOTS FUNC.]
Sets the recording function that uses 2 memory cards.
[OFF]
[RELAY REC]
[SIMUL REC]
[BACKGR REC]
(Factory setting: [RELAY REC])
[PRE REC]
Sets whether to perform pre-recording. (l 128)
The items that can be selected are as follows.
≥ [ON], [OFF]
(Factory setting: [OFF])
Chapter 4 Operation — Menu settings
Does not set.
Sets to the relay recording. (l 128)
Sets to the simultaneous recording. (l 129)
Sets to the background recording. (l 130)
- 79 -