Panasonic AG-CX7 Operating Instructions Manual page 118

Using fast zoom
When [FAST ZOOM] is assigned to a USER button, you can use fast zoom by operating the zoom lever (on the grip).
1
Select the [CAMERA] menu → [USER SW] → [USER1] to [USER12] → [FAST ZOOM].
2
Either press the USER button assigned to [FAST ZOOM] or touch the USER button icon.
3
Push the zoom lever (on the grip) until the end to zoom.
≥ The zoom ratio display changes during fast zoom. (For example:
@ NOTE
0 When the [CAMERA] menu → [SW MODE] → [H.ZOOM SPEED] is set to [7], fast zoom can also be used by operating the zoom lever (on the handle).
0 As the operating noise of fast zoom will be louder than normal, the operating noise may be recorded during recording. If the operating noise is a
problem, disable [FAST ZOOM].
0 Auto focus may not be able to keep up during fast zoom, depending on the subject.
0 Fast zoom cannot be used in the following case:
j When interval recording is enabled
Chapter 5 Shooting — Using the zoom function
99)
- 118 -