Panasonic AG-CX7 Operating Instructions Manual page 89

[SETUP FILE(SD CARD)]
Loads or saves setup files on a memory card.
[LOAD]
[SAVE]
[SAVE AS]
[SETUP FILE(MEMORY)]
Loads/saves/initializes setup files in the internal memory of the unit.
[LOAD]
[SAVE]
[INITIALIZE]
[SLOT FOR LOAD/SAVE]
Sets the card slot to load and save the scene file, setup file, and streaming setting file.
The items that can be set are as follows.
≥ [SLOT1], [SLOT2]
(Factory setting: [SLOT1])
[HANDLE TALLY LED]
Sets whether the tally lamp is to illuminate or not.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[CLOCK]
[CLOCK SETTING]
Sets the calendar (date of the built-in clock) and time.
Year
Month
Day
Hour
Minute
[TIME ZONE]
Sets the time zone. It will switch to the time with the time difference added when the time zone setting is changed.
The items that can be set are as follows.
≥ [j12:00]...[i12:00] (30 minutes steps), [i12:45], [i13:00]
(Factory setting: [i8:00])
[DATE FORMAT]
Sets the display order of the year, month, and date of the calendar (date of the built-in clock). This is reflected to the date display of the clip information.
The items that can be set are as follows.
≥ [Y-M-D], [M-D-Y], [D-M-Y]
(Factory setting: [D-M-Y])
[USB DEVICE]
[CARD READER MODE]
Switches the unit to the card reader mode. A computer or other device can be connected via USB to use as a card reader of the memory card.
The items that can be selected are as follows.
≥ [YES], [NO]
@ NOTE
0 When switched to card reader mode while using a battery, the LCD monitor turns off after approximately 5 seconds.
The LCD monitor turns on when you perform the following operations:
j Turn the multidial up or down
j Touch the LCD monitor
0 To exit the card reader mode, do one of the following operations:
j Turn the power off
j Press the <EXIT> button
j Press the multidial
j Touch [ ]
Chapter 4 Operation — Menu settings
Selects the setup file saved on the memory card to load on the unit.
The unit will automatically restart after loading.
Overwrites the file selected in the list of the setup files saved on the memory card with the current setting values of the unit.
Enter a file name to save the current setting values in the unit as a new setup file in the memory card.
Loads setup file saved on the memory.
The unit will automatically restart after loading.
Saves the setup file to the memory.
Restores the factory settings from the current settings for the menus in the setup file.
The unit will automatically restart after execution.
[2018]...[2037]
[JAN]...[DEC] ([1]...[12])
[1]...[31] (This changes according to the year and month settings)
[0]...[23]
[0]...[59]
- 89 -