Chengdu Ebyte Electronic Technology Co.,Ltd.
6.4 Command list
6.4.1 AT Test command
6.4.2 AT+RESET Reset command
6.4.3 AT+RESTORE Restore factory command
Description:
1. Restart to take effect. After setting successfully, restart immediately;
2.In the process of restoring the factory settings, any kind of reset is prohibited, and the power off is prohibited before the
operation is completed.
6.4.4 AT+BAUDABT On/Off any baud rate setting
Inquiry
Setting
Parameter
Description
Takes effect immediately, save when power off
Before closing any baud rate setting, if the baud rate is not regular, modify it to a regular baud rate and then close
Copyright ©2012–2019,Chengdu Ebyte Electronic Technology Co.,Ltd.
4-17
Command
AT
Description:No
Command
AT+RESET
Description:Immediate effect
Command
AT+RESTORE
Command
AT+BAUDABT?
AT+BAUDABT=[para]
para(ASCII)
0
1
E104-BT40 User Manual
Response
+OK
Response
+OK
Response
+OK
Response
+OK=[para]
+OK:Success
+ERR=[NUM]:Error
Description
Off(Default)
On