Step 2: Connecting Speakers - Philips FWD20/98 User Manual

Connections
For best possible surround sound, all the
speakers (except subwoofer) should be placed
at the same distance from the listening position.
1
Place the front left and right speakers at equal
distances from the TV and at an angle of
approximately 45 degrees from the listening
position.
2
Place the center speaker above the TV or the
DVD system so that the center channel's sound
is localized.
3
Place the rear speakers at normal listening ear
level facing each other or hang on the wall.
4
Place the subwoofer on the floor near the TV.
Notes:
– To avoid magnetic interference, do not position
the front speakers too close to your TV.
– Allow adequate ventilation around the DVD
system.
10

Step 2: Connecting speakers

Subwoofer
SUB SR SL FR C FL
(6Ω) SPEAKER (4Ω)
Connect the speaker wires to the SPEAKER
terminals by matching the color and silkscreen,
coloured (marked) wire to "+" and black
(unmarked) wire to "–". Fully inser t the stripped
portion of the speaker wire into the terminal as
shown.
1
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Surround
speaker (right) Surround
speaker (left)
Center speaker
Front speaker (left)
Front speaker (right)
2