Step 3: Connecting Tv Set - Philips FWD20/98 User Manual

Step 3: Connecting TV set

IMPORTANT!
– You only need to make one video
connection from the following options,
according to the capabilities of your TV
system.
– Component Video connection provides
higher picture quality. These options must
be available on your TV set.
– Connect the system directly to the TV
set.
Using Video In jack (CVBS)
1
Use the composite video cable (yellow) to
connect the system's VIDEO OUT jack to the
video input jack (or labeled as A/V In, Video In,
Composite or Baseband) on the TV set.
2
To hear the sound of this DVD Player through
your TV, use the audio cables (white/red) to
connect LINE OUT (L/R) jacks of the DVD
Player to the corresponding AUDIO IN jacks on
the TV.
SUB SR SL FR C F
(6Ω) SPEAKER (4Ω)
IMPORTANT!
– To set the VIDEO OUT (put) to 'Cr Cb
Y', see Setting video preference.
Using component Video In jack (Cr Cb
Y)
●
Use the component video cables (red/blue/
green) to connect the system's Cr Cb Y jacks to
the corresponding Component video input jacks
on the TV set.
2
To hear the sound of this DVD Player through
your TV, use the audio cables (white/red) to
connect LINE OUT (L/R) jacks of the DVD
Player to the corresponding AUDIO IN jacks on
the TV.
SUB SR SL FR C F
(6Ω) SPEAKER (4Ω)
11