Step 3: Setting Video Preference - Philips FWD20/98 User Manual

Preparations
IMPORTANT!
– Make sure you have completed all the
necessary connections. (See Connections
– Connecting TV set)
Step 3: Setting video
preference
Turn on the TV set and set it to the correct
Video-In channel.
➜
You may go to channel 1 on your TV set, then
press the channel button repeatedly until you see
the Video In channel.
➜
Or, you can use the TV remote control to
select different video modes.
➜
Or, set TV to channel 3 or 4 if you are using
an RF modulator.
Language Video
TV Shape 4:3 LB
TV System
Auto
Video out
S-VIDEO
1
In the disc mode, stop playback and press
SYSTEM MENU.
2 5 6
Press / /5/4 on the remote control to
toggle through the functions and select your
preferential option.
➜
Move to Video and press OK or 4.
➜
Move to one of the following and press OK.
18
Audio Rating
4:3 PS
4:3 LB
16:9
– Setting TV Shape
Select the aspect ratio of the TV to be connected.
4:3 PS (Pan and Scan mode )
– If you have a conventional TV set and your
DVD is not formatted for widescreen viewing, use
this setting. A wide picture is displayed on the
whole TV screen with a portion automatically cut
off.
4:3 LB (Letterbox mode )
– If you have a conventional TV set and your
DVD is formatted for widescreen viewing, use this
setting. A wide picture with bands displayed on
the upper and lower portions of the TV screen.
16:9 (Wide screen mode)
– If you have a widescreen TV set, use this
setting (you must also set your widescreen TV to
"full size") available on a disc, then the disc's own
preference will be used.
Note:
The format you select must be available on the disc.
If it is not, the setting for TV Shape will not affect the
picture during playback.