Connections; Step 1: Placing Speakers And Subwoofer; Step 2: Connecting Speakers And Subwoofer - Philips FWD182 User Manual

Step 1: Placing speakers and
subwoofer
su bw oof er
Place the front left and right speakers at equal
distances from the TV set and at an angle of
approximately 45 degrees from the listening
position.
Notes:
– To avoid magnetic interference, do not position
the front speakers too close to your TV set.
– Allow adequate ventilation around the DVD Mini
Hi-Fi System.
TV

Connections

Step 2: Connecting speakers
and subwoofer
Active subwoofer
AC
Speaker
(right)
Connect the speaker wires to the SPEAKERS
(FRONT) terminals, right speaker to "R" and left
speaker to "L", coloured (marked) wire to "+"
and black (unmarked) wire to "–". Fully inser t the
stripped portion of the speaker wire into the
terminal as shown.
Connect the subwoofer using subwoofer cable
to the SUBWOOFER OUT jack on the DVD
Mini Hi-Fi System.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Use an active subwoofer only.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Speakers
Front Left (L)
Front Right (R)
IMPORTANT!
The type plate is located on the rear of
the system.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it.
IN
Speaker
(left)
–
+
Black White
Black Red
11