Table of Contents
Advertisement
Other Functions
Radio reception
1
Turn the SOURCE control knob to select FM
or MW source.
2
Turn the TUNING control knob to tune to a
desired radio frequency.
Tape playback
1
Turn the SOURCE control knob to select
TAPE source.
2
Press STOP•OPEN
DVD player to open the tape door.
3
Insert a recorded tape and close the tape door.
●
Load the tape with the open side towards the
front and the full spool to the left.
4
Press down PLAY 2 on the top of the DVD
player to start playback.
To stop playback
●
Press STOP•OPEN
Rewinding/Fast forwarding
1
Stop playback, press down SEARCH
on the top of the DVD player.
28
9
ç on the top of the
9
ç again.
5 6
2
Press STOP•OPEN
or fast forwarding.
General information on
recording
●
For recording, use only NORMAL (IEC type I)
tapes on which the tabs have not yet been
broken. This deck is not suitable for recording on
METAL (IEC IV) type tapes.
●
The best recording level is set automatically.
Altering the VOLUME or DBB will not affect the
recording in progress.
●
At the very beginning and end of the tape, no
recording will take place during the 7 seconds
when the leader tape passes the recorder heads.
●
To protect a tape from accidental erasure, have
the tape in front of you and break out the left
tab. Recording on this side is no longer possible.
If, however, you wish to record over this side
again, cover the tabs with a piece of adhesive
tape.
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
Start recording
1
Load a recordable tape into the tape deck with
the full spool to the left.
2
Prepare the source to be recorded.
DVD/CD/VCD/MP3 – load the disc and start
playback from the start point of recording.
TUNER – tune to the desired radio station.
AUX – connect external equipment.
3
Press down RECORD ●.
When recording is in progress
●
To stop recording, press STOP•OPEN
●
It is not possible to listen to another source.
9
ç to stop rewinding
9
ç.
Advertisement
Table of Contents
Troubleshooting
